Mounting at the top of the front struts, these plates keep the vehicle at the original ride height whereas most other Camber plates will raise the ride height because they are flat. Our Camber Plates provide a mounting that does not move under load, and offer approx 2.5 degrees of camber control.
Please also note that the picture of the hardare shows, 8 bolts, 8 washers and 4 small spacers that are included with the kit. There are also 2 longer spacers that are shown at the top of the image and these are NOT included with the normal kit,.. these larger spacers are for use with certain aftermarket strut such as MCS as well as others, when you need slightly more clearance between the plate and the spring hat. Please let us know if you require these and we can substitute them in the kit as needed.
Application: all 924/931/944/951/968
Camber plate installation instructions.
